EFFECT OF MIXING APPROACH ON THE PROPERTIES OF CONCRETE WITH DIFFERENT AGGREGATE TYPES

1. Aleksandar Savić, Univerzitet u Beogradu, Građevinski fakultet, Bulevar kralja Aleksandra 73, 11120 Beograd, Serbia
2. Gordana Broćeta, Univerzitet u Banjoj Luci, Arhitektonsko-građevinsko-geodetski fakultet, Vojvode S. Stepanovića 77/3,, Republic of Srpska, Bosnia and Herzegovina
3. Marina Aškrabić, Univerzitet u Beogradu, Građevinski fakultet, Bulevar kralja Aleksandra 73, Serbia
4. Sonja Panić, Univerzitet u Beogradu, Građevinski fakultet, Bulevar kralja Aleksandra 73, 11 000 Beograd, Serbia
5. Ljubomir Vidanović, Univerzitet u Beogradu, Građevinski fakultet, Bulevar kralja Aleksandra 73, 11 000 Beograd, Serbia

The subject of the tests presented in the paper is the influence of the mixing method on the physical-mechanical properties of fine-grained concrete with the nominally largest aggregate grain of 8 mm. Concretes with three different aggregate compositions (river, crushed and mixture with coarse recycled aggregate) were mixed by the usual, and then by two-stage mixing approach (TSMA). Slump and flow, density and temperature were tested for fresh concrete. The compressive strength, flexural, splitting tensile strength, density, ultrasonic pulse velocity and water absorption were recorded on hardened concrete. Concretes prepared using recycled aggregate can, according to all the mentioned tests, be used as an adequate replacement for concretes prepared using river or crushed aggregate, while the two-phase approach had the greatest effect on increase of the flexural strength.

Ključne reči: recycled aggregate; concrete; two-phase mixing approach; properties of concrete

Tematska oblast: SIMPOZIJUM A - Nauka materije, kondenzovane materije i fizika čvrstog stanja

Datum: 28.08.2020.

Contemporary Materials 2020 - Savremeni Materijali


Ostali radovi sa konferencije


Pretraži radove